Annotation of freem/doc/Makefile.in, revision 1.1
1.1 ! snw 1: # Makefile.in generated by automake 1.17 from Makefile.am.
! 2: # @configure_input@
! 3:
! 4: # Copyright (C) 1994-2024 Free Software Foundation, Inc.
! 5:
! 6: # This Makefile.in is free software; the Free Software Foundation
! 7: # gives unlimited permission to copy and/or distribute it,
! 8: # with or without modifications, as long as this notice is preserved.
! 9:
! 10: # This program is distributed in the hope that it will be useful,
! 11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! 12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! 13: # PARTICULAR PURPOSE.
! 14:
! 15: @SET_MAKE@
! 16: VPATH = @srcdir@
! 17: am__is_gnu_make = { \
! 18: if test -z '$(MAKELEVEL)'; then \
! 19: false; \
! 20: elif test -n '$(MAKE_HOST)'; then \
! 21: true; \
! 22: elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
! 23: true; \
! 24: else \
! 25: false; \
! 26: fi; \
! 27: }
! 28: am__make_running_with_option = \
! 29: case $${target_option-} in \
! 30: ?) ;; \
! 31: *) echo "am__make_running_with_option: internal error: invalid" \
! 32: "target option '$${target_option-}' specified" >&2; \
! 33: exit 1;; \
! 34: esac; \
! 35: has_opt=no; \
! 36: sane_makeflags=$$MAKEFLAGS; \
! 37: if $(am__is_gnu_make); then \
! 38: sane_makeflags=$$MFLAGS; \
! 39: else \
! 40: case $$MAKEFLAGS in \
! 41: *\\[\ \ ]*) \
! 42: bs=\\; \
! 43: sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
! 44: | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
! 45: esac; \
! 46: fi; \
! 47: skip_next=no; \
! 48: strip_trailopt () \
! 49: { \
! 50: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
! 51: }; \
! 52: for flg in $$sane_makeflags; do \
! 53: test $$skip_next = yes && { skip_next=no; continue; }; \
! 54: case $$flg in \
! 55: *=*|--*) continue;; \
! 56: -*I) strip_trailopt 'I'; skip_next=yes;; \
! 57: -*I?*) strip_trailopt 'I';; \
! 58: -*O) strip_trailopt 'O'; skip_next=yes;; \
! 59: -*O?*) strip_trailopt 'O';; \
! 60: -*l) strip_trailopt 'l'; skip_next=yes;; \
! 61: -*l?*) strip_trailopt 'l';; \
! 62: -[dEDm]) skip_next=yes;; \
! 63: -[JT]) skip_next=yes;; \
! 64: esac; \
! 65: case $$flg in \
! 66: *$$target_option*) has_opt=yes; break;; \
! 67: esac; \
! 68: done; \
! 69: test $$has_opt = yes
! 70: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
! 71: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
! 72: am__rm_f = rm -f $(am__rm_f_notfound)
! 73: am__rm_rf = rm -rf $(am__rm_f_notfound)
! 74: pkgdatadir = $(datadir)/@PACKAGE@
! 75: pkgincludedir = $(includedir)/@PACKAGE@
! 76: pkglibdir = $(libdir)/@PACKAGE@
! 77: pkglibexecdir = $(libexecdir)/@PACKAGE@
! 78: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
! 79: install_sh_DATA = $(install_sh) -c -m 644
! 80: install_sh_PROGRAM = $(install_sh) -c
! 81: install_sh_SCRIPT = $(install_sh) -c
! 82: INSTALL_HEADER = $(INSTALL_DATA)
! 83: transform = $(program_transform_name)
! 84: NORMAL_INSTALL = :
! 85: PRE_INSTALL = :
! 86: POST_INSTALL = :
! 87: NORMAL_UNINSTALL = :
! 88: PRE_UNINSTALL = :
! 89: POST_UNINSTALL = :
! 90: build_triplet = @build@
! 91: host_triplet = @host@
! 92: subdir = doc
! 93: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
! 94: am__aclocal_m4_deps = $(top_srcdir)/m4/ax_lib_motif.m4 \
! 95: $(top_srcdir)/m4/ax_lib_readline.m4 \
! 96: $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
! 97: $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
! 98: $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
! 99: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
! 100: $(ACLOCAL_M4)
! 101: DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
! 102: mkinstalldirs = $(install_sh) -d
! 103: CONFIG_HEADER = $(top_builddir)/src/config.h
! 104: CONFIG_CLEAN_FILES =
! 105: CONFIG_CLEAN_VPATH_FILES =
! 106: AM_V_P = $(am__v_P_@AM_V@)
! 107: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
! 108: am__v_P_0 = false
! 109: am__v_P_1 = :
! 110: AM_V_GEN = $(am__v_GEN_@AM_V@)
! 111: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
! 112: am__v_GEN_0 = @echo " GEN " $@;
! 113: am__v_GEN_1 =
! 114: AM_V_at = $(am__v_at_@AM_V@)
! 115: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
! 116: am__v_at_0 = @
! 117: am__v_at_1 =
! 118: SOURCES =
! 119: DIST_SOURCES =
! 120: AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
! 121: am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
! 122: am__v_DVIPS_0 = @echo " DVIPS " $@;
! 123: am__v_DVIPS_1 =
! 124: AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
! 125: am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
! 126: am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
! 127: am__v_MAKEINFO_1 =
! 128: AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
! 129: am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
! 130: am__v_INFOHTML_0 = @echo " INFOHTML" $@;
! 131: am__v_INFOHTML_1 =
! 132: AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
! 133: am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
! 134: am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
! 135: am__v_TEXI2DVI_1 =
! 136: AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
! 137: am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
! 138: am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
! 139: am__v_TEXI2PDF_1 =
! 140: AM_V_texinfo = $(am__v_texinfo_@AM_V@)
! 141: am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
! 142: am__v_texinfo_0 = -q
! 143: am__v_texinfo_1 =
! 144: AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
! 145: am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
! 146: am__v_texidevnull_0 = > /dev/null
! 147: am__v_texidevnull_1 =
! 148: INFO_DEPS = $(srcdir)/freem.info
! 149: am__TEXINFO_TEX_DIR = $(srcdir)
! 150: DVIS = freem.dvi
! 151: PDFS = freem.pdf
! 152: PSS = freem.ps
! 153: HTMLS = freem.html
! 154: TEXINFOS = freem.texi
! 155: TEXI2DVI = texi2dvi
! 156: TEXI2PDF = $(TEXI2DVI) --pdf --batch
! 157: MAKEINFOHTML = $(MAKEINFO) --html
! 158: AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
! 159: DVIPS = dvips
! 160: am__can_run_installinfo = \
! 161: case $$AM_UPDATE_INFO_DIR in \
! 162: n|no|NO) false;; \
! 163: *) (install-info --version) >/dev/null 2>&1;; \
! 164: esac
! 165: am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
! 166: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
! 167: am__vpath_adj = case $$p in \
! 168: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
! 169: *) f=$$p;; \
! 170: esac;
! 171: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
! 172: am__install_max = 40
! 173: am__nobase_strip_setup = \
! 174: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
! 175: am__nobase_strip = \
! 176: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
! 177: am__nobase_list = $(am__nobase_strip_setup); \
! 178: for p in $$list; do echo "$$p $$p"; done | \
! 179: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
! 180: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
! 181: if (++n[$$2] == $(am__install_max)) \
! 182: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
! 183: END { for (dir in files) print dir, files[dir] }'
! 184: am__base_list = \
! 185: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
! 186: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
! 187: am__uninstall_files_from_dir = { \
! 188: { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
! 189: || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
! 190: $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
! 191: }
! 192: man1dir = $(mandir)/man1
! 193: NROFF = nroff
! 194: MANS = $(man1_MANS)
! 195: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
! 196: am__DIST_COMMON = $(srcdir)/Makefile.in texinfo.tex
! 197: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 198: ACLOCAL = @ACLOCAL@
! 199: AMTAR = @AMTAR@
! 200: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
! 201: AR = @AR@
! 202: AUTOCONF = @AUTOCONF@
! 203: AUTOHEADER = @AUTOHEADER@
! 204: AUTOMAKE = @AUTOMAKE@
! 205: AWK = @AWK@
! 206: CC = @CC@
! 207: CCDEPMODE = @CCDEPMODE@
! 208: CFLAGS = @CFLAGS@
! 209: CPPFLAGS = @CPPFLAGS@
! 210: CSCOPE = @CSCOPE@
! 211: CTAGS = @CTAGS@
! 212: CYGPATH_W = @CYGPATH_W@
! 213: DEFS = @DEFS@
! 214: DEPDIR = @DEPDIR@
! 215: DLLTOOL = @DLLTOOL@
! 216: DSYMUTIL = @DSYMUTIL@
! 217: DUMPBIN = @DUMPBIN@
! 218: ECHO_C = @ECHO_C@
! 219: ECHO_N = @ECHO_N@
! 220: ECHO_T = @ECHO_T@
! 221: EGREP = @EGREP@
! 222: ETAGS = @ETAGS@
! 223: EXEEXT = @EXEEXT@
! 224: FGREP = @FGREP@
! 225: FILECMD = @FILECMD@
! 226: GREP = @GREP@
! 227: INSTALL = @INSTALL@
! 228: INSTALL_DATA = @INSTALL_DATA@
! 229: INSTALL_PROGRAM = @INSTALL_PROGRAM@
! 230: INSTALL_SCRIPT = @INSTALL_SCRIPT@
! 231: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
! 232: LD = @LD@
! 233: LDFLAGS = @LDFLAGS@
! 234: LIBOBJS = @LIBOBJS@
! 235: LIBS = @LIBS@
! 236: LIBTOOL = @LIBTOOL@
! 237: LIPO = @LIPO@
! 238: LN_S = @LN_S@
! 239: LTLIBOBJS = @LTLIBOBJS@
! 240: LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
! 241: MAKEINFO = @MAKEINFO@
! 242: MANIFEST_TOOL = @MANIFEST_TOOL@
! 243: MKDIR_P = @MKDIR_P@
! 244: NM = @NM@
! 245: NMEDIT = @NMEDIT@
! 246: OBJDUMP = @OBJDUMP@
! 247: OBJEXT = @OBJEXT@
! 248: OTOOL = @OTOOL@
! 249: OTOOL64 = @OTOOL64@
! 250: PACKAGE = @PACKAGE@
! 251: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
! 252: PACKAGE_NAME = @PACKAGE_NAME@
! 253: PACKAGE_STRING = @PACKAGE_STRING@
! 254: PACKAGE_TARNAME = @PACKAGE_TARNAME@
! 255: PACKAGE_URL = @PACKAGE_URL@
! 256: PACKAGE_VERSION = @PACKAGE_VERSION@
! 257: PATH_SEPARATOR = @PATH_SEPARATOR@
! 258: RANLIB = @RANLIB@
! 259: SED = @SED@
! 260: SET_MAKE = @SET_MAKE@
! 261: SHELL = @SHELL@
! 262: STRIP = @STRIP@
! 263: VERSION = @VERSION@
! 264: abs_builddir = @abs_builddir@
! 265: abs_srcdir = @abs_srcdir@
! 266: abs_top_builddir = @abs_top_builddir@
! 267: abs_top_srcdir = @abs_top_srcdir@
! 268: ac_ct_AR = @ac_ct_AR@
! 269: ac_ct_CC = @ac_ct_CC@
! 270: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
! 271: am__include = @am__include@
! 272: am__leading_dot = @am__leading_dot@
! 273: am__quote = @am__quote@
! 274: am__rm_f_notfound = @am__rm_f_notfound@
! 275: am__tar = @am__tar@
! 276: am__untar = @am__untar@
! 277: am__xargs_n = @am__xargs_n@
! 278: bindir = @bindir@
! 279: build = @build@
! 280: build_alias = @build_alias@
! 281: build_cpu = @build_cpu@
! 282: build_os = @build_os@
! 283: build_vendor = @build_vendor@
! 284: builddir = @builddir@
! 285: datadir = @datadir@
! 286: datarootdir = @datarootdir@
! 287: docdir = @docdir@
! 288: dvidir = @dvidir@
! 289: exec_prefix = @exec_prefix@
! 290: host = @host@
! 291: host_alias = @host_alias@
! 292: host_cpu = @host_cpu@
! 293: host_os = @host_os@
! 294: host_vendor = @host_vendor@
! 295: htmldir = @htmldir@
! 296: includedir = @includedir@
! 297: infodir = @infodir@
! 298: install_sh = @install_sh@
! 299: libdir = @libdir@
! 300: libexecdir = @libexecdir@
! 301: localedir = @localedir@
! 302: localstatedir = @localstatedir@
! 303: mandir = @mandir@
! 304: mkdir_p = @mkdir_p@
! 305: oldincludedir = @oldincludedir@
! 306: pdfdir = @pdfdir@
! 307: prefix = @prefix@
! 308: program_transform_name = @program_transform_name@
! 309: psdir = @psdir@
! 310: runstatedir = @runstatedir@
! 311: sbindir = @sbindir@
! 312: sharedstatedir = @sharedstatedir@
! 313: srcdir = @srcdir@
! 314: sysconfdir = @sysconfdir@
! 315: target_alias = @target_alias@
! 316: top_build_prefix = @top_build_prefix@
! 317: top_builddir = @top_builddir@
! 318: top_srcdir = @top_srcdir@
! 319:
! 320: #
! 321: #
! 322: # Makefile.am (doc)
! 323: # automake rules for documentation
! 324: #
! 325: #
! 326: # Author: Serena Willis <snw@coherent-logic.com>
! 327: # Copyright (C) 1998 MUG Deutschland
! 328: # Copyright (C) 2020, 2025 Coherent Logic Development LLC
! 329: #
! 330: #
! 331: # This file is part of FreeM.
! 332: #
! 333: # FreeM is free software: you can redistribute it and/or modify
! 334: # it under the terms of the GNU Affero Public License as published by
! 335: # the Free Software Foundation, either version 3 of the License, or
! 336: # (at your option) any later version.
! 337: #
! 338: # FreeM is distributed in the hope that it will be useful,
! 339: # but WITHOUT ANY WARRANTY; without even the implied warranty of
! 340: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
! 341: # GNU Affero Public License for more details.
! 342: #
! 343: # You should have received a copy of the GNU Affero Public License
! 344: # along with FreeM. If not, see <https://www.gnu.org/licenses/>.
! 345: #
! 346: #
! 347: info_TEXINFOS = freem.texi
! 348: man1_MANS = freem.1
! 349: all: all-am
! 350:
! 351: .SUFFIXES:
! 352: .SUFFIXES: .dvi .html .info .pdf .ps .texi
! 353: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
! 354: @for dep in $?; do \
! 355: case '$(am__configure_deps)' in \
! 356: *$$dep*) \
! 357: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
! 358: && { if test -f $@; then exit 0; else break; fi; }; \
! 359: exit 1;; \
! 360: esac; \
! 361: done; \
! 362: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
! 363: $(am__cd) $(top_srcdir) && \
! 364: $(AUTOMAKE) --gnu doc/Makefile
! 365: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! 366: @case '$?' in \
! 367: *config.status*) \
! 368: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
! 369: *) \
! 370: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
! 371: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
! 372: esac;
! 373:
! 374: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
! 375: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 376:
! 377: $(top_srcdir)/configure: $(am__configure_deps)
! 378: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 379: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
! 380: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 381: $(am__aclocal_m4_deps):
! 382:
! 383: mostlyclean-libtool:
! 384: -rm -f *.lo
! 385:
! 386: clean-libtool:
! 387: -rm -rf .libs _libs
! 388:
! 389: .texi.info:
! 390: $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
! 391: am__cwd=`pwd` && $(am__cd) $(srcdir) && \
! 392: rm -rf $$backupdir && mkdir $$backupdir && \
! 393: if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
! 394: for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
! 395: if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
! 396: done; \
! 397: else :; fi && \
! 398: cd "$$am__cwd"; \
! 399: if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
! 400: -o $@ $<; \
! 401: then \
! 402: rc=0; \
! 403: $(am__cd) $(srcdir); \
! 404: else \
! 405: rc=$$?; \
! 406: $(am__cd) $(srcdir) && \
! 407: $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
! 408: fi; \
! 409: rm -rf $$backupdir; exit $$rc
! 410:
! 411: .texi.dvi:
! 412: $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
! 413: MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
! 414: $(TEXI2DVI) $(AM_TEXI2FLAGS) -I $(srcdir) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
! 415: $<
! 416:
! 417: .texi.pdf:
! 418: $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
! 419: MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
! 420: $(TEXI2PDF) $(AM_TEXI2FLAGS) -I $(srcdir) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
! 421: $<
! 422:
! 423: .texi.html:
! 424: $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
! 425: $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
! 426: -o $(@:.html=.htp) $<; \
! 427: then \
! 428: rm -rf $@ && mv $(@:.html=.htp) $@; \
! 429: else \
! 430: rm -rf $(@:.html=.htp); exit 1; \
! 431: fi
! 432: $(srcdir)/freem.info: freem.texi
! 433: freem.dvi: freem.texi
! 434: freem.pdf: freem.texi
! 435: freem.html: freem.texi
! 436: .dvi.ps:
! 437: $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
! 438: $(DVIPS) $(AM_V_texinfo) -o $@ $<
! 439:
! 440: uninstall-dvi-am:
! 441: @$(NORMAL_UNINSTALL)
! 442: @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
! 443: for p in $$list; do \
! 444: $(am__strip_dir) \
! 445: echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
! 446: rm -f "$(DESTDIR)$(dvidir)/$$f"; \
! 447: done
! 448:
! 449: uninstall-html-am:
! 450: @$(NORMAL_UNINSTALL)
! 451: @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
! 452: for p in $$list; do \
! 453: $(am__strip_dir) \
! 454: echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
! 455: rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
! 456: done
! 457:
! 458: uninstall-info-am:
! 459: @$(PRE_UNINSTALL)
! 460: @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
! 461: list='$(INFO_DEPS)'; \
! 462: for file in $$list; do \
! 463: relfile=`echo "$$file" | sed 's|^.*/||'`; \
! 464: echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
! 465: if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
! 466: then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
! 467: done; \
! 468: else :; fi
! 469: @$(NORMAL_UNINSTALL)
! 470: @list='$(INFO_DEPS)'; \
! 471: for file in $$list; do \
! 472: relfile=`echo "$$file" | sed 's|^.*/||'`; \
! 473: relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
! 474: (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
! 475: echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
! 476: rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
! 477: else :; fi); \
! 478: done
! 479:
! 480: uninstall-pdf-am:
! 481: @$(NORMAL_UNINSTALL)
! 482: @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
! 483: for p in $$list; do \
! 484: $(am__strip_dir) \
! 485: echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
! 486: rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
! 487: done
! 488:
! 489: uninstall-ps-am:
! 490: @$(NORMAL_UNINSTALL)
! 491: @list='$(PSS)'; test -n "$(psdir)" || list=; \
! 492: for p in $$list; do \
! 493: $(am__strip_dir) \
! 494: echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
! 495: rm -f "$(DESTDIR)$(psdir)/$$f"; \
! 496: done
! 497:
! 498: dist-info: $(INFO_DEPS)
! 499: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
! 500: list='$(INFO_DEPS)'; \
! 501: for base in $$list; do \
! 502: case $$base in \
! 503: $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
! 504: esac; \
! 505: if test -f $$base; then d=.; else d=$(srcdir); fi; \
! 506: base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
! 507: for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
! 508: if test -f $$file; then \
! 509: relfile=`expr "$$file" : "$$d/\(.*\)"`; \
! 510: test -f "$(distdir)/$$relfile" || \
! 511: cp -p $$file "$(distdir)/$$relfile"; \
! 512: else :; fi; \
! 513: done; \
! 514: done
! 515:
! 516: mostlyclean-aminfo:
! 517: -$(am__rm_rf) freem.t2d freem.t2p
! 518:
! 519: clean-aminfo:
! 520: -$(am__rm_rf) freem.dvi freem.pdf freem.ps freem.html
! 521:
! 522: maintainer-clean-aminfo:
! 523: @list='$(INFO_DEPS)'; for i in $$list; do \
! 524: i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
! 525: echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
! 526: rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
! 527: done
! 528: install-man1: $(man1_MANS)
! 529: @$(NORMAL_INSTALL)
! 530: @list1='$(man1_MANS)'; \
! 531: list2=''; \
! 532: test -n "$(man1dir)" \
! 533: && test -n "`echo $$list1$$list2`" \
! 534: || exit 0; \
! 535: echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
! 536: $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
! 537: { for i in $$list1; do echo "$$i"; done; \
! 538: if test -n "$$list2"; then \
! 539: for i in $$list2; do echo "$$i"; done \
! 540: | sed -n '/\.1[a-z]*$$/p'; \
! 541: fi; \
! 542: } | while read p; do \
! 543: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
! 544: echo "$$d$$p"; echo "$$p"; \
! 545: done | \
! 546: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
! 547: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
! 548: sed 'N;N;s,\n, ,g' | { \
! 549: list=; while read file base inst; do \
! 550: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
! 551: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
! 552: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
! 553: fi; \
! 554: done; \
! 555: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
! 556: while read files; do \
! 557: test -z "$$files" || { \
! 558: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
! 559: $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
! 560: done; }
! 561:
! 562: uninstall-man1:
! 563: @$(NORMAL_UNINSTALL)
! 564: @list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
! 565: files=`{ for i in $$list; do echo "$$i"; done; \
! 566: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
! 567: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
! 568: dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
! 569: tags TAGS:
! 570:
! 571: ctags CTAGS:
! 572:
! 573: cscope cscopelist:
! 574:
! 575: distdir: $(BUILT_SOURCES)
! 576: $(MAKE) $(AM_MAKEFLAGS) distdir-am
! 577:
! 578: distdir-am: $(DISTFILES)
! 579: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 580: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 581: list='$(DISTFILES)'; \
! 582: dist_files=`for file in $$list; do echo $$file; done | \
! 583: sed -e "s|^$$srcdirstrip/||;t" \
! 584: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
! 585: case $$dist_files in \
! 586: */*) $(MKDIR_P) `echo "$$dist_files" | \
! 587: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
! 588: sort -u` ;; \
! 589: esac; \
! 590: for file in $$dist_files; do \
! 591: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
! 592: if test -d $$d/$$file; then \
! 593: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
! 594: if test -d "$(distdir)/$$file"; then \
! 595: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 596: fi; \
! 597: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
! 598: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
! 599: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 600: fi; \
! 601: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
! 602: else \
! 603: test -f "$(distdir)/$$file" \
! 604: || cp -p $$d/$$file "$(distdir)/$$file" \
! 605: || exit 1; \
! 606: fi; \
! 607: done
! 608: $(MAKE) $(AM_MAKEFLAGS) \
! 609: top_distdir="$(top_distdir)" distdir="$(distdir)" \
! 610: dist-info
! 611: check-am: all-am
! 612: check: check-am
! 613: all-am: Makefile $(INFO_DEPS) $(MANS)
! 614: installdirs:
! 615: for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
! 616: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
! 617: done
! 618: install: install-am
! 619: install-exec: install-exec-am
! 620: install-data: install-data-am
! 621: uninstall: uninstall-am
! 622:
! 623: install-am: all-am
! 624: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
! 625:
! 626: installcheck: installcheck-am
! 627: install-strip:
! 628: if test -z '$(STRIP)'; then \
! 629: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 630: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 631: install; \
! 632: else \
! 633: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 634: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 635: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
! 636: fi
! 637: mostlyclean-generic:
! 638:
! 639: clean-generic:
! 640:
! 641: distclean-generic:
! 642: -$(am__rm_f) $(CONFIG_CLEAN_FILES)
! 643: -test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
! 644:
! 645: maintainer-clean-generic:
! 646: @echo "This command is intended for maintainers to use"
! 647: @echo "it deletes files that may require special tools to rebuild."
! 648: clean: clean-am
! 649:
! 650: clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
! 651:
! 652: distclean: distclean-am
! 653: -rm -f Makefile
! 654: distclean-am: clean-am distclean-generic
! 655:
! 656: dvi: dvi-am
! 657:
! 658: dvi-am: $(DVIS)
! 659:
! 660: html: html-am
! 661:
! 662: html-am: $(HTMLS)
! 663:
! 664: info: info-am
! 665:
! 666: info-am: $(INFO_DEPS)
! 667:
! 668: install-data-am: install-info-am install-man
! 669:
! 670: install-dvi: install-dvi-am
! 671:
! 672: install-dvi-am: $(DVIS)
! 673: @$(NORMAL_INSTALL)
! 674: @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
! 675: if test -n "$$list"; then \
! 676: echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
! 677: $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
! 678: fi; \
! 679: for p in $$list; do \
! 680: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
! 681: echo "$$d$$p"; \
! 682: done | $(am__base_list) | \
! 683: while read files; do \
! 684: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
! 685: $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
! 686: done
! 687: install-exec-am:
! 688:
! 689: install-html: install-html-am
! 690:
! 691: install-html-am: $(HTMLS)
! 692: @$(NORMAL_INSTALL)
! 693: @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
! 694: if test -n "$$list"; then \
! 695: echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
! 696: $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
! 697: fi; \
! 698: for p in $$list; do \
! 699: if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
! 700: $(am__strip_dir) \
! 701: d2=$$d$$p; \
! 702: if test -d "$$d2"; then \
! 703: echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
! 704: $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
! 705: echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
! 706: $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
! 707: else \
! 708: list2="$$list2 $$d2"; \
! 709: fi; \
! 710: done; \
! 711: test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
! 712: while read files; do \
! 713: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
! 714: $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
! 715: done; }
! 716: install-info: install-info-am
! 717:
! 718: install-info-am: $(INFO_DEPS)
! 719: @$(NORMAL_INSTALL)
! 720: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
! 721: list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
! 722: if test -n "$$list"; then \
! 723: echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
! 724: $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
! 725: fi; \
! 726: for file in $$list; do \
! 727: case $$file in \
! 728: $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
! 729: esac; \
! 730: if test -f $$file; then d=.; else d=$(srcdir); fi; \
! 731: file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
! 732: for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
! 733: $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
! 734: if test -f $$ifile; then \
! 735: echo "$$ifile"; \
! 736: else : ; fi; \
! 737: done; \
! 738: done | $(am__base_list) | \
! 739: while read files; do \
! 740: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
! 741: $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
! 742: @$(POST_INSTALL)
! 743: @if $(am__can_run_installinfo); then \
! 744: list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
! 745: for file in $$list; do \
! 746: relfile=`echo "$$file" | sed 's|^.*/||'`; \
! 747: echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
! 748: install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
! 749: done; \
! 750: else : ; fi
! 751: install-man: install-man1
! 752:
! 753: install-pdf: install-pdf-am
! 754:
! 755: install-pdf-am: $(PDFS)
! 756: @$(NORMAL_INSTALL)
! 757: @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
! 758: if test -n "$$list"; then \
! 759: echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
! 760: $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
! 761: fi; \
! 762: for p in $$list; do \
! 763: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
! 764: echo "$$d$$p"; \
! 765: done | $(am__base_list) | \
! 766: while read files; do \
! 767: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
! 768: $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
! 769: install-ps: install-ps-am
! 770:
! 771: install-ps-am: $(PSS)
! 772: @$(NORMAL_INSTALL)
! 773: @list='$(PSS)'; test -n "$(psdir)" || list=; \
! 774: if test -n "$$list"; then \
! 775: echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
! 776: $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
! 777: fi; \
! 778: for p in $$list; do \
! 779: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
! 780: echo "$$d$$p"; \
! 781: done | $(am__base_list) | \
! 782: while read files; do \
! 783: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
! 784: $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
! 785: installcheck-am:
! 786:
! 787: maintainer-clean: maintainer-clean-am
! 788: -rm -f Makefile
! 789: maintainer-clean-am: distclean-am maintainer-clean-aminfo \
! 790: maintainer-clean-generic
! 791:
! 792: mostlyclean: mostlyclean-am
! 793:
! 794: mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
! 795: mostlyclean-libtool
! 796:
! 797: pdf: pdf-am
! 798:
! 799: pdf-am: $(PDFS)
! 800:
! 801: ps: ps-am
! 802:
! 803: ps-am: $(PSS)
! 804:
! 805: uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
! 806: uninstall-man uninstall-pdf-am uninstall-ps-am
! 807:
! 808: uninstall-man: uninstall-man1
! 809:
! 810: .MAKE: install-am install-strip
! 811:
! 812: .PHONY: all all-am check check-am clean clean-aminfo clean-generic \
! 813: clean-libtool cscopelist-am ctags-am dist-info distclean \
! 814: distclean-generic distclean-libtool distdir dvi dvi-am html \
! 815: html-am info info-am install install-am install-data \
! 816: install-data-am install-dvi install-dvi-am install-exec \
! 817: install-exec-am install-html install-html-am install-info \
! 818: install-info-am install-man install-man1 install-pdf \
! 819: install-pdf-am install-ps install-ps-am install-strip \
! 820: installcheck installcheck-am installdirs maintainer-clean \
! 821: maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
! 822: mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool pdf \
! 823: pdf-am ps ps-am tags-am uninstall uninstall-am \
! 824: uninstall-dvi-am uninstall-html-am uninstall-info-am \
! 825: uninstall-man uninstall-man1 uninstall-pdf-am uninstall-ps-am
! 826:
! 827: .PRECIOUS: Makefile
! 828:
! 829:
! 830: # Tell versions [3.59,3.63) of GNU make to not export all variables.
! 831: # Otherwise a system limit (for SysV at least) may be exceeded.
! 832: .NOEXPORT:
! 833:
! 834: # Tell GNU make to disable its built-in pattern rules.
! 835: %:: %,v
! 836: %:: RCS/%,v
! 837: %:: RCS/%
! 838: %:: s.%
! 839: %:: SCCS/s.%
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [Coherent Logic Development] / freem / doc