[BACK]Return to freem.texi CVS log [TXT] [DIR] Up to [Coherent Logic Development] / freem / doc

Diff for /freem/doc/freem.texi between versions 1.40 and 1.43

version 1.40, 2025/05/03 04:05:23 version 1.43, 2025/05/05 04:55:42
Line 699  Please note that FreeM is not entirely s Line 699  Please note that FreeM is not entirely s
 * $SYSTEM::                  MDC system ID of FreeM.  * $SYSTEM::                  MDC system ID of FreeM.
 * $TEST::                    Truth value of last conditional expression or result of certain @code{LOCK} operations.  * $TEST::                    Truth value of last conditional expression or result of certain @code{LOCK} operations.
 * $TLEVEL::                  Current level of transaction nesting.  * $TLEVEL::                  Current level of transaction nesting.
 * $WITH::                    Current variable prefix set by @code{WITH} command.  * $WITH::                    Current variable prefix set by @code{ZWITH} command.
 * $X::                       Current horizontal screen position.  * $X::                       Current horizontal screen position.
 * $Y::                       Current vertical screen position.  * $Y::                       Current vertical screen position.
 * $ZA::                      Current position of file on @code{$IO}.  * $ZA::                      Current position of file on @code{$IO}.
Line 895  uncommitted transactions exist. Line 895  uncommitted transactions exist.
 @cindex $WITH  @cindex $WITH
 @cindex intrinsic special variables, $WITH  @cindex intrinsic special variables, $WITH
   
 Returns the variable prefix set by the @code{@ref{WITH}} command.  Returns the variable prefix set by the @code{@ref{ZWITH}} command.
   
 @node $X  @node $X
 @section $X  @section $X
Line 2018  Identical to @ref{$TRANSLATE()}, except Line 2018  Identical to @ref{$TRANSLATE()}, except
 * AUNBLOCK::                            Decrement the block counter for one or more event classes.  * AUNBLOCK::                            Decrement the block counter for one or more event classes.
 * BREAK::                               Interrupt a running routine to allow interactive debugging.  * BREAK::                               Interrupt a running routine to allow interactive debugging.
 * CLOSE::                               Close an input/output device.  * CLOSE::                               Close an input/output device.
 * CONST::                               Define a constant that cannot be altered after initial definition.  
 * DO::                                  Transfer program control to one or more subroutines or introduces a new execution level.  * DO::                                  Transfer program control to one or more subroutines or introduces a new execution level.
 * ELSE::                                Execute the remainder of a line if @code{@ref{$TEST}} evaluates @emph{false}.  * ELSE::                                Execute the remainder of a line if @code{@ref{$TEST}} evaluates @emph{false}.
 * FOR::                                 Repeat execution of a line or block of code.  * FOR::                                 Repeat execution of a line or block of code.
Line 2031  Identical to @ref{$TRANSLATE()}, except Line 2030  Identical to @ref{$TRANSLATE()}, except
 * KSUBSCRIPTS::                         Kill only the descendant subscripts of a local, global, global, or structured system variable.  * KSUBSCRIPTS::                         Kill only the descendant subscripts of a local, global, global, or structured system variable.
 * KVALUE::                              Kill only the value of a local, global, or structured system variable.  * KVALUE::                              Kill only the value of a local, global, or structured system variable.
 * LOCK::                                Control advisory locking for concurrency control.  * LOCK::                                Control advisory locking for concurrency control.
 * MAP::                                 Map a global name to a non-default namespace.  
 * MERGE::                               Merge contents of one local, global, or structured system variable into another.  * MERGE::                               Merge contents of one local, global, or structured system variable into another.
 * NEW::                                 Introduce a new scope for a specified local variable or intrinsic special variable or instantiate an object.  * NEW::                                 Introduce a new scope for a specified local variable or intrinsic special variable or instantiate an object.
 * OPEN::                                Open a sequential or socket input/output device.  * OPEN::                                Open a sequential or socket input/output device.
Line 2040  Identical to @ref{$TRANSLATE()}, except Line 2038  Identical to @ref{$TRANSLATE()}, except
 * SET::                                 Set the value of a local variable, global, intrinsic special variable, or structured system variable.  * SET::                                 Set the value of a local variable, global, intrinsic special variable, or structured system variable.
 * TCOMMIT::                             Commit a transaction.  * TCOMMIT::                             Commit a transaction.
 * THEN::                                Preserve @code{@ref{$TEST}} until the end of the current line.  * THEN::                                Preserve @code{@ref{$TEST}} until the end of the current line.
 * THROW::                               Programmatically raise an error condition.  
 * TROLLBACK::                           Roll back all pending transactions.  * TROLLBACK::                           Roll back all pending transactions.
 * TSTART::                              Introduce a new transaction processing level.  * TSTART::                              Introduce a new transaction processing level.
 * UNMAP::                               Remove a mapping of a global to a non-default namespace.  
 * USE::                                 Set the currently-active input/output device.  * USE::                                 Set the currently-active input/output device.
 * VIEW::                                Modify FreeM internal parameters.  * VIEW::                                Modify FreeM internal parameters.
 * WATCH::                               Enable or disable watchpoints, or set or clear watchpoints on specified globals, locals, or structured system variables.  
 * WITH::                                Set prefix for future variable references.  
 * WRITE::                               Write output to current input/output device.  * WRITE::                               Write output to current input/output device.
 * XECUTE::                              Interpret string as M code.  * XECUTE::                              Interpret string as M code.
 * ZBREAK::                              Unknown.  * ZBREAK::                              Unknown.
   * ZCONST::                              Define a constant that cannot be altered after initial definition.
 * ZGO::                                 Unknown.  * ZGO::                                 Unknown.
 * ZHALT::                               Unknown.  * ZHALT::                               Unknown.
 * ZINSERT::                             Insert code into routine buffer.  * ZINSERT::                             Insert code into routine buffer.
 * ZJOB::                                Unknown.  * ZJOB::                                Invokes a job, ignoring any timeouts.
 * ZLOAD::                               Load routine into routine buffer.  * ZLOAD::                               Load routine into routine buffer.
   * ZMAP::                                Map a global name to a non-default namespace.
 * ZNEW::                                Unknown.  * ZNEW::                                Unknown.
 * ZPRINT::                              Print contents of routine buffer.  * ZPRINT::                              Print contents of routine buffer.
 * ZQUIT::                               Unknown.  * ZQUIT::                               Quits multiple stack levels at once.
 * ZREMOVE::                             Remove code from routine buffer.  * ZREMOVE::                             Remove code from routine buffer.
 * ZSAVE::                               Save routine buffer to disk.  * ZSAVE::                               Save routine buffer to disk.
   * ZTHROW::                              Programmatically raise an error condition.
 * ZTRAP::                               Unknown.  * ZTRAP::                               Unknown.
   * ZUNMAP::                              Remove a mapping of a global to a non-default namespace.
   * ZWATCH::                              Enable or disable watchpoints, or set or clear watchpoints on specified globals, locals, or structured system variables.
   * ZWITH::                               Set prefix for future variable references.
 * ZWRITE::                              Write local variable, global, or structured system variable to @code{@ref{$IO}}.  * ZWRITE::                              Write local variable, global, or structured system variable to @code{@ref{$IO}}.
 @end menu  @end menu
   
Line 2359  In its argumentless form, @code{CLOSE} c Line 2359  In its argumentless form, @code{CLOSE} c
   
 In its single-argument form, @code{CLOSE} closes the I/O device associated with channel @emph{channel}, provided that @emph{channel} represents a currently-open device, and the optional @emph{postcondition} is @emph{true} or omitted.  In its single-argument form, @code{CLOSE} closes the I/O device associated with channel @emph{channel}, provided that @emph{channel} represents a currently-open device, and the optional @emph{postcondition} is @emph{true} or omitted.
   
 @node CONST  
 @section CONST  
 @cindex CONST  
 @cindex commands, CONST  
 @cindex commands, non-standard  
 @emph{FreeM Extension}  
   
 Defines a local @emph{constant}, or variable that cannot be altered after its initial definition, provided the optional @emph{postcondition} is @emph{true} or omitted.  
   
 Constants must only be locals, and globals are not supported.  
   
 @emph{Syntax}  
   
 @example  
 @code{CONST@emph{:postcondition} @emph{mref1}=@emph{initial-value1},...,@emph{mrefN}=@emph{initial-valueN}}  
 @end example  
   
 @node DO  @node DO
 @section DO  @section DO
 @cindex DO  @cindex DO
Line 2742  If @code{LOCK} succeeds within @emph{tim Line 2725  If @code{LOCK} succeeds within @emph{tim
 LOCK[@emph{:postcondition}] @emph{name}[:@emph{timeout}][,...@emph{name}[:@emph{timeout}]]  LOCK[@emph{:postcondition}] @emph{name}[:@emph{timeout}][,...@emph{name}[:@emph{timeout}]]
 @end example  @end example
   
 @node MAP  
 @section MAP  
 @cindex MAP  
 @cindex commands, MAP  
 @cindex commands, implementation-specific  
 @cindex commands, non-standard  
   
 Maps global name @code{gvn} to be mapped to the non-default namespace @emph{expr V namespace}, provided the optional @emph{postcondition} evaluates to @emph{true} or is omitted.  
   
 @emph{Syntax}  
   
 @example  
 MAP[@emph{:postcondition}] GLOBAL @emph{gvn}=@emph{expr V namespace}  
 @end example  
   
 @node MERGE  @node MERGE
 @section MERGE  @section MERGE
 @cindex MERGE  @cindex MERGE
Line 3006  Saves the value of @code{$TEST} until th Line 2974  Saves the value of @code{$TEST} until th
 IF 1 THEN  WRITE "HELLO!",!  IF 1 THEN  WRITE "HELLO!",!
 @end example  @end example
   
 @node THROW  
 @section THROW  
 @cindex THROW  
 @cindex commands, THROW  
 @cindex commands, non-standard  
 @emph{FreeM Extension}  
   
 Raises an error condition as long as the optional @emph{postcondition} is @emph{true} or omitted.  
   
 @emph{Syntax}  
   
 @example  
 @code{THROW@emph{:postcondition} @emph{expr V error-code}}  
 @end example  
   
 @emph{Example}  
   
 @example  
 @code{THROW "M102"}  
 @end example  
   
 @node TROLLBACK  @node TROLLBACK
 @section TROLLBACK  @section TROLLBACK
 @cindex TROLLBACK  @cindex TROLLBACK
Line 3091  If you are using more than one transacti Line 3038  If you are using more than one transacti
 TSTART (FOO,BAR):(SERIAL,TRANSACTIONID="FOO")  TSTART (FOO,BAR):(SERIAL,TRANSACTIONID="FOO")
 @end example  @end example
   
 @node UNMAP  
 @section UNMAP  
 @cindex UNMAP  
 @cindex commands, UNMAP  
 @cindex commands, implementation-specific  
 @cindex commands, non-standard  
   
 Removes any mapping connecting @emph{gvn} to a non-default namespace, provided the optional @emph{postcondition} evaluates to @emph{true} or is omitted.  
   
 @emph{Syntax}  
   
 @example  
 UNMAP GLOBAL @emph{gvn}  
 @end example  
   
 @node USE  @node USE
 @section USE  @section USE
Line 3409  VIEW 133:@emph{tvexpr} Line 3342  VIEW 133:@emph{tvexpr}
   
 @end table  @end table
   
 @node WATCH  
 @section WATCH  
 @cindex WATCH  
 @cindex commands, WATCH  
 @cindex commands, debugging  
 @cindex commands, implementation-specific  
 @cindex commands, non-standard  
 @emph{FreeM Extension}  
   
 Sets a watchpoint on a global, local, or SSVN node.  
   
 @emph{Syntax}  
   
   
 In its @emph{argumentless} form, @code{WATCH} toggles watchpoints on and off, provided the optional @emph{postcondition} is @emph{true} or omitted.  
   
 @example  
 WATCH[@emph{:postcondition}]  
 @end example  
   
 In its @emph{inclusive} form, @code{WATCH} adds, removes, or examines watchpoints, provided the optional @emph{postcondition} is @emph{true} or omitted.  
   
 A @code{+} adds a new watchpoint to the following variable.  
   
 A @code{-} removes an existing watchpoint for the following variable.  
   
 A @code{?} examines the status of a watchpoint for the following variable.  
   
 @example  
 WATCH[@emph{:postcondition}] [+|-|?]@emph{var1}...,[+|-|?]@emph{varN}  
 @end example  
   
   
 The following example demonstrates turning watchpoint processing on and adding a watchpoint for global variable @code{^snw(1)}. It then changes the value of @code{^snw(1)}.  
   
 @example  
 DEFAULT.USER> WATCH  
    
 Watchpoints enabled.  
    
 DEFAULT.USER> WATCH +^SNW(1)  
    
 Added '^SNW("1")' to the watchlist.  
    
 DEFAULT.USER> SET ^SNW(1)="new value"  
    
 >> WATCHPOINT:  ^SNW("1") => 'new value' (changed 1 times)  
   
 @end example  
   
 The following example will remove that watchpoint:  
   
 @example  
 DEFAULT.USER> WATCH -^SNW(1)  
    
 Removed '^SNW("1")' from the watchlist.  
    
 DEFAULT.USER> WATCH ?^SNW(1)  
    
 '^SNW("1")' is not being watched.  
 @end example  
   
 @node WITH  
 @section WITH  
 @cindex WITH  
 @cindex commands, WITH  
 @cindex commands, non-standard  
 @emph{FreeM Extension}  
   
 NOTE: This command may be deprecated and removed in future FreeM releases.  
   
 Sets a prefix to be applied to all subsequent local variable or constant references.  
   
 @emph{Syntax}  
   
 @example  
 @code{WITH@emph{:postcondition} @emph{var-prefix}}  
 @end example  
   
 In the above single-argument form, sets the @code{$WITH} prefix to @emph{var-prefix}, provided that the optional @emph{postcondition} is either @emph{true} or omitted.  
   
 The @emph{var-prefix} argument may be a string literal or any valid FreeM expression.  
   
 @example  
 @code{WITH@emph{:postcondition}}  
 @end example  
   
 In the above argumentless form, clears the @code{$WITH} prefix, provided the optional @emph{postcondition} is either @emph{true} or omitted. Equivalent to @code{WITH ""}.  
   
   
 @node WRITE  @node WRITE
Line 3518  In the above argumentless form, clears t Line 3363  In the above argumentless form, clears t
 @cindex commands, non-standard  @cindex commands, non-standard
 @emph{FreeM Extension}  @emph{FreeM Extension}
   
   @node ZCONST
   @section ZCONST
   @cindex ZCONST
   @cindex commands, ZCONST
   @cindex commands, non-standard
   @emph{FreeM Extension}
   
   Defines a local @emph{constant}, or variable that cannot be altered after its initial definition, provided the optional @emph{postcondition} is @emph{true} or omitted.
   
   Constants must only be locals, and globals are not supported.
   
   @emph{Syntax}
   
   @example
   @code{ZCONST@emph{:postcondition} @emph{mref1}=@emph{initial-value1},...,@emph{mrefN}=@emph{initial-valueN}}
   @end example
   
 @node ZGO  @node ZGO
 @section ZGO  @section ZGO
 @cindex ZGO  @cindex ZGO
Line 3570  Loads routine @emph{<routine-name>} into Line 3432  Loads routine @emph{<routine-name>} into
 ZLOAD@emph{:postcondition} @emph{<routine-name>}  ZLOAD@emph{:postcondition} @emph{<routine-name>}
 @end example  @end example
   
   
   @node ZMAP
   @section ZMAP
   @cindex ZMAP
   @cindex commands, ZMAP
   @cindex commands, implementation-specific
   @cindex commands, non-standard
   
   Maps global name @code{gvn} to be mapped to the non-default namespace @emph{expr V namespace}, provided the optional @emph{postcondition} evaluates to @emph{true} or is omitted.
   
   @emph{Syntax}
   
   @example
   ZMAP[@emph{:postcondition}] GLOBAL @emph{gvn}=@emph{expr V namespace}
   @end example
   
 @node ZNEW  @node ZNEW
 @section ZNEW  @section ZNEW
 @cindex ZNEW  @cindex ZNEW
Line 3628  In its argumentless form, quits from @co Line 3506  In its argumentless form, quits from @co
 @cindex commands, non-standard  @cindex commands, non-standard
 @emph{FreeM Extension}  @emph{FreeM Extension}
   
   
   @node ZTHROW
   @section ZTHROW
   @cindex ZTHROW
   @cindex commands, ZTHROW
   @cindex commands, non-standard
   @emph{FreeM Extension}
   
   Raises an error condition as long as the optional @emph{postcondition} is @emph{true} or omitted.
   
   @emph{Syntax}
   
   @example
   @code{ZTHROW@emph{:postcondition} @emph{expr V error-code}}
   @end example
   
   @emph{Example}
   
   @example
   @code{ZTHROW "M102"}
   @end example
   
 @node ZTRAP  @node ZTRAP
 @section ZTRAP  @section ZTRAP
 @cindex ZTRAP  @cindex ZTRAP
Line 3637  In its argumentless form, quits from @co Line 3537  In its argumentless form, quits from @co
 @cindex commands, non-standard  @cindex commands, non-standard
 @emph{FreeM Extension}  @emph{FreeM Extension}
   
   @node ZUNMAP
   @section ZUNMAP
   @cindex ZUNMAP
   @cindex commands, ZUNMAP
   @cindex commands, implementation-specific
   @cindex commands, non-standard
   
   Removes any mapping connecting @emph{gvn} to a non-default namespace, provided the optional @emph{postcondition} evaluates to @emph{true} or is omitted.
   
   @emph{Syntax}
   
   @example
   ZUNMAP GLOBAL @emph{gvn}
   @end example
   
   @node ZWATCH
   @section ZWATCH
   @cindex ZWATCH
   @cindex commands, ZWATCH
   @cindex commands, debugging
   @cindex commands, implementation-specific
   @cindex commands, non-standard
   @emph{FreeM Extension}
   
   Sets a watchpoint on a global, local, or SSVN node.
   
   @emph{Syntax}
   
   
   In its @emph{argumentless} form, @code{ZWATCH} toggles watchpoints on and off, provided the optional @emph{postcondition} is @emph{true} or omitted.
   
   @example
   ZWATCH[@emph{:postcondition}]
   @end example
   
   In its @emph{inclusive} form, @code{ZWATCH} adds, removes, or examines watchpoints, provided the optional @emph{postcondition} is @emph{true} or omitted.
   
   A @code{+} adds a new watchpoint to the following variable.
   
   A @code{-} removes an existing watchpoint for the following variable.
   
   A @code{?} examines the status of a watchpoint for the following variable.
   
   @example
   ZWATCH[@emph{:postcondition}] [+|-|?]@emph{var1}...,[+|-|?]@emph{varN}
   @end example
   
   
   The following example demonstrates turning watchpoint processing on and adding a watchpoint for global variable @code{^snw(1)}. It then changes the value of @code{^snw(1)}.
   
   @example
   DEFAULT.USER> ZWATCH
    
   Watchpoints enabled.
    
   DEFAULT.USER> ZWATCH +^SNW(1)
    
   Added '^SNW("1")' to the watchlist.
    
   DEFAULT.USER> SET ^SNW(1)="new value"
    
   >> WATCHPOINT:  ^SNW("1") => 'new value' (changed 1 times)
   
   @end example
   
   The following example will remove that watchpoint:
   
   @example
   DEFAULT.USER> ZWATCH -^SNW(1)
    
   Removed '^SNW("1")' from the watchlist.
    
   DEFAULT.USER> ZWATCH ?^SNW(1)
    
   '^SNW("1")' is not being watched.
   @end example
   
   @node ZWITH
   @section ZWITH
   @cindex ZWITH
   @cindex commands, ZWITH
   @cindex commands, non-standard
   @emph{FreeM Extension}
   
   NOTE: This command may be deprecated and removed in future FreeM releases.
   
   Sets a prefix to be applied to all subsequent local variable or constant references.
   
   @emph{Syntax}
   
   @example
   @code{ZWITH@emph{:postcondition} @emph{var-prefix}}
   @end example
   
   In the above single-argument form, sets the @code{$WITH} prefix to @emph{var-prefix}, provided that the optional @emph{postcondition} is either @emph{true} or omitted.
   
   The @emph{var-prefix} argument may be a string literal or any valid FreeM expression.
   
   @example
   @code{ZWITH@emph{:postcondition}}
   @end example
   
   In the above argumentless form, clears the @code{$WITH} prefix, provided the optional @emph{postcondition} is either @emph{true} or omitted. Equivalent to @code{ZWITH ""}.
   
   
   
   
   
   
   
   
 @node ZWRITE  @node ZWRITE
 @section ZWRITE  @section ZWRITE
 @cindex ZWRITE  @cindex ZWRITE
Line 4780  The effect of this is that the operation Line 4791  The effect of this is that the operation
 @cindex variables, local  @cindex variables, local
 @cindex local variables  @cindex local variables
   
   @menu
   * Local Variables Overview::            The basics of locals.
   * Creating Local Variables::            Creating locals with SET.
   * Removing Local Variables::            Removing locals with KILL.
   @end menu
   
   @node Local Variables Overview
 @section Local Variables Overview  @section Local Variables Overview
   
 FreeM @emph{local variables} have the same data structure as global variables, but are scoped to a single FreeM process, and stored in memory.  FreeM @emph{local variables} have the same data structure as global variables, but are scoped to a single FreeM process, and stored in memory.
Line 4927  If you use other M implementations, you Line 4945  If you use other M implementations, you
 @cindex object-oriented programming  @cindex object-oriented programming
 @cindex programming, object-oriented  @cindex programming, object-oriented
   
 @menu  
 * Classes::                         The basis of object-oriented programming.  
 * Inheritance::                     Basing one class upon another.  
 * Methods::                         Attaching code to a class.  
 * Public and Private Variables::    Managing class member access.  
 * Instantiating Objects::           Creating instances of classes.  
 * Determining Object Class::        Getting object information at runtime.  
 @end menu  
   
 @node Classes  @node Classes
 @section Classes  @section Classes
   
 @menu  
 * Class Overview::                  Class basics.  
 * Constructors::                    Managing object creation.  
 * Destructors::                     Cleaning up.  
 * Runtime Polymorphism::            Selecting methods at runtime.  
 @end menu  
   
 @node Class Overview  @node Class Overview
 @subsection Class Overview  @subsection Class Overview
Removed from v.1.40  
changed lines
  Added in v.1.43

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>