[BACK]Return to freem.texi CVS log [TXT] [DIR] Up to [Coherent Logic Development] / freem / doc

Diff for /freem/doc/freem.texi between versions 1.59 and 1.64

version 1.59, 2025/05/18 20:40:35 version 1.64, 2025/05/20 14:36:06
Line 4 Line 4
 @settitle The FreeM Manual  @settitle The FreeM Manual
   
 @copying  @copying
 This manual is for FreeM, (version 0.65.1-rc0), which is a free software implementation of the M programming language.  This manual is for FreeM, (version 0.65.1-rc1), which is a free software implementation of the M programming language.
   
 Print-optimized versions of this book are typeset in @emph{Computer Modern} by the author using the @emph{GNU Texinfo} tools.  Print-optimized versions of this book are typeset in @emph{Computer Modern} by the author using the @emph{GNU Texinfo} tools.
   
Line 19  Permission is granted to copy, distribut Line 19  Permission is granted to copy, distribut
   
 @title The FreeM Manual  @title The FreeM Manual
 @subtitle @sc{The Official Manual of FreeM}  @subtitle @sc{The Official Manual of FreeM}
 @subtitle Version 0.65.1-rc0  @subtitle Version 0.65.1-rc1
 @c@vskip 10pt  @c@vskip 10pt
 @c@center @image{freem-logo-sm,,,,.png}  @c@center @image{freem-logo-sm,,,,.png}
 @author Serena Willis  @author Serena Willis
Line 445  Attempting to start a FreeM interpreter Line 445  Attempting to start a FreeM interpreter
 The FreeM direct-mode environment is the mode entered when FreeM is invoked without the use of @option{-r @emph{<entryref>}} or @option{--routine=@emph{<entryref>}}:  The FreeM direct-mode environment is the mode entered when FreeM is invoked without the use of @option{-r @emph{<entryref>}} or @option{--routine=@emph{<entryref>}}:
   
 @example  @example
 Coherent Logic Development FreeM version 0.65.1-rc0 (x86_64-pc-linux-gnu)  Coherent Logic Development FreeM version 0.65.1-rc1 (x86_64-pc-linux-gnu)
 Copyright (C) 2014, 2020, 2021 Coherent Logic Development LLC  Copyright (C) 2014, 2020, 2021 Coherent Logic Development LLC
   
   
Line 2660  In the above @emph{inclusive} form, @cod Line 2660  In the above @emph{inclusive} form, @cod
 @cartouche  @cartouche
 @quotation  @quotation
 @emph{Note}  @emph{Note}
 The below @emph{argumentless} and @emph{exclusive} forms of @code{KSUBSCRIPTS} are not implemented in FreeM, as of version 0.65.1-rc0, but are planned for a future release.  The below @emph{argumentless} and @emph{exclusive} forms of @code{KSUBSCRIPTS} are not implemented in FreeM, as of version 0.65.1-rc1, but are planned for a future release.
 @end quotation  @end quotation
 @end cartouche  @end cartouche
   
Line 2695  In the above @emph{inclusive} form, @cod Line 2695  In the above @emph{inclusive} form, @cod
 @cartouche  @cartouche
 @quotation  @quotation
 @emph{Note}  @emph{Note}
 The below @emph{argumentless} and @emph{exclusive} forms of @code{KVALUE} are not implemented in FreeM, as of version 0.65.1-rc0, but are planned for a future release.  The below @emph{argumentless} and @emph{exclusive} forms of @code{KVALUE} are not implemented in FreeM, as of version 0.65.1-rc1, but are planned for a future release.
 @end quotation  @end quotation
 @end cartouche  @end cartouche
   
Line 3475  ZEDIT@emph{[:postcondition]} @emph{<rout Line 3475  ZEDIT@emph{[:postcondition]} @emph{<rout
   
 In its single-argument form, edits @emph{<routine-name>}, provided the optional @emph{postcondition} is @emph{true} or omitted.  In its single-argument form, edits @emph{<routine-name>}, provided the optional @emph{postcondition} is @emph{true} or omitted.
   
   If the specified routine does not exist, it will be created.
   
 Routine names must not be quoted, and must not included a leading caret (@code{^}).  Routine names must not be quoted, and must not included a leading caret (@code{^}).
   
 @emph{Errors}  @emph{Errors}
   
 @code{ZEDIT} will raise @code{ZNOPGM} if the routine cannot be found, or there is no routine currently loaded in argumentless form.  @code{ZEDIT} will raise @code{ZNOPGM} in its argumentless form if there is no routine currently loaded.
   
 @node ZGOTO  @node ZGOTO
 @section ZGOTO  @section ZGOTO
Line 3537  ZHALT Line 3539  ZHALT
 @cindex commands, non-standard  @cindex commands, non-standard
 @emph{FreeM Extension}  @emph{FreeM Extension}
   
   Inserts a line of M code into the currently-active routine buffer, provided the optional @emph{postcondition} is @emph{true} or omitted.
   
   @emph{Syntax}
   
   @example
   ZINSERT@emph{:postcondition} @emph{expr V mcode}[:@emph{label}]
   @end example
   
   Above, @emph{expr V mcode} is an expression returning a string giving M code. If @emph{label} is omitted, the code will be inserted at the insertion point, which is typically the end of the routine. Otherwise, the code will be inserted at the line immediately following @emph{label}.
   
 @node ZJOB  @node ZJOB
 @section ZJOB  @section ZJOB
 @cindex ZJOB  @cindex ZJOB
Line 3597  ZMAP[@emph{:postcondition}] GLOBAL @emph Line 3609  ZMAP[@emph{:postcondition}] GLOBAL @emph
 @cindex commands, non-standard  @cindex commands, non-standard
 @emph{FreeM Extension}  @emph{FreeM Extension}
   
 Prints the contents of the current routine buffer, provided the optional @emph{postcondition} is @emph{true} or omitted.  In argumentless form, prints the contents of the current routine buffer, provided the optional @emph{postcondition} is @emph{true} or omitted.
   
 @emph{Syntax}  @emph{Syntax}
   
Line 3605  Prints the contents of the current routi Line 3617  Prints the contents of the current routi
 ZPRINT@emph{:postcondition}  ZPRINT@emph{:postcondition}
 @end example  @end example
   
   In argumented form, prints a subset of the current routine buffer, provided the optional @emph{postcondition} is @emph{true} or omitted.
   
   @emph{Syntax}
   
   @example
   ZPRINT@emph{:postcondition} @emph{start}[:@emph{end}]
   @end example
   
   In the above syntax, @emph{start} and @emph{end} can be a tag in the current routine, or @code{*} to indicate the routine buffer insertion point (typically the end of the routine).
   
 @node ZQUIT  @node ZQUIT
 @section ZQUIT  @section ZQUIT
 @cindex ZQUIT  @cindex ZQUIT
Line 3631  In its argumentless form, quits from @co Line 3653  In its argumentless form, quits from @co
 @cindex commands, non-standard  @cindex commands, non-standard
 @emph{FreeM Extension}  @emph{FreeM Extension}
   
   In argumentless form, removes all M code from the current routine buffer, provided the optional @emph{postcondition} is @emph{true} or omitted.
   
   @emph{Syntax}
   
   @example
   ZREMOVE@emph{:postcondition}
   @end example
   
   In argumented form, removes a subset of the current routine buffer, provided the optional @emph{postcondition} is @emph{true} or omitted.
   
   @emph{Syntax}
   
   @example
   ZREMOVE@emph{:postcondition} @emph{start}[:@emph{end}]
   @end example
   
   In the above syntax, @emph{start} and @emph{end} can be a tag in the current routine, or @code{*} to indicate the routine buffer insertion point (typically the end of the routine).
   
 @node ZSAVE  @node ZSAVE
 @section ZSAVE  @section ZSAVE
 @cindex ZSAVE  @cindex ZSAVE
Line 4065  The following subscripts are supported: Line 4105  The following subscripts are supported:
   
 @table @asis  @table @asis
   
   @item @code{$IO} +R -U -D
   Returns the current value of @code{$IO} for the job.
   
   @item @code{$PDISPLAY} +R -U -D
   Returns the value of @code{$PDISPLAY} for the job.
   
   @item @code{$PRINCIPAL} +R -U -D
   Returns the value of @code{$PRINCIPAL} for the job.
   
   @item @code{$TLEVEL} +R -U -D
   Returns the current transaction level (value of @code{$TLEVEL} for the job.
   
   @item @code{BREAK_HANDLER} +R +U -D
   Contains M code to be executed when the @code{BREAK} command is run.
   
   @item @code{CHARACTER} +R -U -D
   Returns the character set of the job.
   
   @item @code{CWD} +R +U -D
   Returns or sets the current working directory of the job.
   
   @item @code{EVENT} +R +U +D
   The subtree contained under @code{^$JOB($J,"EVENT")} defines asynchronous event handlers for the current job. Please see @emph{Asynchronous Event Handling} for more information.
   
   @item @code{GLOBAL} +R -U -D
   Returns the global environment of the job.
   
   @item @code{GROUP} +R -U -D
   Returns the GID of the group owning the job.
   
 @item @code{GVNDEFAULT} +R +U +D  @item @code{GVNDEFAULT} +R +U +D
 Contains a default expression to be evaluated if a global variable access attempt results in an @code{M7} error.  Contains a default expression to be evaluated if a global variable access attempt results in an @code{M7} error.
   
 Equivalent to wrapping all global accesses in @code{$GET(@emph{global-name},@emph{string-expr})}.  Equivalent to wrapping all global accesses in @code{$GET(@emph{global-name},@emph{string-expr})}.
   
   @item @code{GVNQOVAL} +R +U +D
   Contains the data value (if any) at the subscripted global variable reference from the most recent @code{$ORDER} or @code{$QUERY} operation.
   
   This node is useful for code that uses @code{$ORDER} or @code{$QUERY} heavily in loops that retrieve successive data values, as it will prevent an additional data file scan that would result from retrieving the data value in the usual way, thus improving application performance. However, this optimization comes at the cost of compatibility with other M implementations.
   
   @item @code{GVN_CASE_SENSITIVE} +R +U -D
   Returns or sets the case sensitivity of global names. If set to @code{0}, global names are case-insensitive. If set to @code{1}, global names are case-sensitive.
   
   @item @code{GVN_NAME_SUB_LENGTH} +R +U -D
   Returns or sets the maximum number of characters of a global name plus all of its subscripts, from 1-255.
   
   @item @code{GVN_SUB_LENGTH} +R +U -D
   Returns or sets the maximum number of characters of a single global subscript, from 1-255.
   
   @item @code{GVN_UNIQUE_CHARS} +R +U -D
   Returns or sets the number of characters of a global name that make it unique, from 1 to 255.
   
   @item @code{IOPATH} +R +U -D
   Returns or sets the @emph{I/O path} to be used by the @code{OPEN} command.
   
 @item @code{LVNDEFAULT} +R +U +D  @item @code{LVNDEFAULT} +R +U +D
 Contains a default expression to be evaluated if a local variable access attempt results in an @code{M6} error.  Contains a default expression to be evaluated if a local variable access attempt results in an @code{M6} error.
   
Line 4080  Contains the data value (if any) at the Line 4170  Contains the data value (if any) at the
   
 This node is useful for code that uses @code{$ORDER} or @code{$QUERY} heavily in loops that retrieve successive data values, as it will prevent an additional symbol table scan that would result from retrieving the data value in the usual way, thus improving application performance. However, this optimization comes at the cost of compatibility with other M implementations.  This node is useful for code that uses @code{$ORDER} or @code{$QUERY} heavily in loops that retrieve successive data values, as it will prevent an additional symbol table scan that would result from retrieving the data value in the usual way, thus improving application performance. However, this optimization comes at the cost of compatibility with other M implementations.
   
 @item @code{GVNQOVAL} +R +U +D  @item @code{MATH} +R +U -D
 Contains the data value (if any) at the subscripted global variable reference from the most recent @code{$ORDER} or @code{$QUERY} operation.  Returns or sets the mode in which decimal comparisons and arithmetic calculations are conducted. Valid values are @code{FIXED}, for fixed-point decimals having up to 20,000 digits of precision, as determined by the @code{$ZPRECISION} intrinsic special variable, and @code{IEEE754}, to use IEEE 754 floating-point decimals. When in @code{IEEE754} mode, floating-point numbers support up to 16 digits of numeric precision.
   
 This node is useful for code that uses @code{$ORDER} or @code{$QUERY} heavily in loops that retrieve successive data values, as it will prevent an additional data file scan that would result from retrieving the data value in the usual way, thus improving application performance. However, this optimization comes at the cost of compatibility with other M implementations.  @code{IEEE754} mode will make mathematical calculations significantly faster, especially when accelerated by a floating-point processor, at the expense of precision and accuracy.
   
 @item @code{ZCOMMANDS} +R +U -D  @code{FIXED} mode is recommended for financial calculations, or where precision and accuracy are valued over performance. @code{FIXED} is the default mode of FreeM operation.
 Contains a space-delimited list of @code{Z}-commands to be treated as intrinsic. Any @code{Z}-command not appearing in this list will be treated as a user-defined command.  
   
 For instance, if command @code{ZFOO} does @emph{not} appear in this list, FreeM will attempt to run @code{^%ZFOO} as a subroutine when the @code{ZFOO} command is encountered in program code.  Attempting to @code{SET} this node to values other than @code{FIXED} or @code{IEEE754} will set @code{$ECODE} to @code{M29}.
   
 If you remove a command from this list, you may provide your own private M implementation of the command in the manner described above.  @item @code{NAMESPACE} +R +U -D
   Returns or sets the name of the job's currently-active namespace.
   
 If an argument is passed to a @code{Z}-command you implement in M, it is made available to your M code in a variable whose name is specified in @code{^$JOB($JOB,"ZCOMMAND_ARGUMENT_NAME")}, which defaults to @code{%}.  @item @code{OPEN} +R -U -D
   The @code{^$JOB($JOB,"OPEN",<channel>} subscripts list the open I/O channels in the specified job.
   
 @item @code{PIPE_GLVN} +R +U -D  @item @code{PIPE_GLVN} +R +U -D
 Contains an M local or global variable to be used as standard input or standard output for the external shell commands run by @code{!<} and @code{!>}.  Contains an M local or global variable to be used as standard input or standard output for the external shell commands run by @code{!<} and @code{!>}.
   
 @item @code{ZCOMMAND_ARGUMENT_NAME} +R +U -D  @item @code{PRIORITY} +R +U -D
 Returns or sets the variable name in which arguments to user-defined @code{Z}-commands are passed. Defaults to @code{%}.  Returns or sets the @emph{nice} value of the FreeM job.
   
 @item @code{ZFUNCTIONS} +R +U -D  
 Contains a space-delimited list of @code{Z} functions to be treated as intrinsic. Any @code{Z} function not appearing in this list will be treated as a user-defined extrinsic function.  
   
 For instance, if function @code{$ZFOO} does @emph{not} appear in this list, FreeM will attempt to return the value of @code{$$^%ZFOO} called as an extrinsic function.  
   
 If you remove a function from this list, you may provide your own private M implementation of the function in the manner described above.  
   
 @item @code{ZSVS} +R +U -D  
 Contains a space-delimited list of @code{Z} special variables to be treated as intrinsic. Any @code{Z} special variable  not appearing in this list will be treated as a user-defined extrinsic function taking no arguments.  
   
 For instance, if the special variable @code{$ZFOO} does @emph{not} appear in this list, FreeM will attempt to return the value of @code{$$^%ZFOO} called as an extrinsic function.  @item @code{REVSTR} +R +U -D
   When set to 1, allows @code{$EXTRACT} to accept negative values.
   
 If you remove a built-in special variable from this list, you may provide your own private M implementation of the special variable in the manner described above.  @item @code{ROUTINE} +R -U -D
   Returns the name of the routine currently being executed by the job.
   
 @item @code{BREAK_HANDLER} +R +U -D  @item @code{ROUTINE_BUFFER_AUTO_ADJUST} +R +U -D
 Contains M code to be executed when the @code{BREAK} command is run.  Determines whether or not the size of routine buffers will be automatically adjusted at runtime. If set to @code{0}, routine buffers will be fixed to the byte size specified in @code{ROUTINE_BUFFER_SIZE} and may be manually resized using @code{ROUTINE_BUFFER_SIZE}. If set to @code{1}, routine buffers will grow automatically as necessary.
   @item @code{ROUTINE_BUFFER_COUNT} +R +U -D
   Returns or sets the number of routine buffers that FreeM will store in memory concurrently. Raising this value will increase memory usage, but will also increase performance if your applications call many different routines repeatedly.
   
 @item @code{ROUTINE_BUFFER_SIZE} +R +U -D  @item @code{ROUTINE_BUFFER_SIZE} +R +U -D
 Returns or sets the number of bytes allocated to each routine buffer. If @code{ROUTINE_BUFFER_AUTO_ADJUST} is set to @code{0}, this determines the maximum size of routines that FreeM will execute.  Returns or sets the number of bytes allocated to each routine buffer. If @code{ROUTINE_BUFFER_AUTO_ADJUST} is set to @code{0}, this determines the maximum size of routines that FreeM will execute.
   
 @item @code{ROUTINE_BUFFER_COUNT} +R +U -D  @item @code{SINGLE_USER} +R +U -D
 Returns or sets the number of routine buffers that FreeM will store in memory concurrently. Raising this value will increase memory usage, but will also increase performance if your applications call many different routines repeatedly.  If set to @code{1}, FreeM will skip all file locking operations on globals. If set to @code{0}, FreeM will enforce file locking on both.
   
 @item @code{ROUTINE_BUFFER_AUTO_ADJUST} +R +U -D  
 Determines whether or not the size of routine buffers will be automatically adjusted at runtime. If set to @code{0}, routine buffers will be fixed to the byte size specified in @code{ROUTINE_BUFFER_SIZE} and may be manually resized using @code{ROUTINE_BUFFER_SIZE}. If set to @code{1}, routine buffers will grow automatically as necessary.  
   
 @item @code{SYMBOL_TABLE_SIZE} +R +U -D  Setting @code{SINGLE_USER} to @code{1} will improve FreeM performance, but you must @emph{ONLY} use this on systems where you are absolutely sure that only one FreeM process will run at any given time, as running multiple instances of FreeM concurrently when any of them are set to @code{SINGLE_USER} mode @emph{will} cause global data corruption.
 Returns or sets the number of bytes allocated to each of the two FreeM symbol tables. If @code{SYMBOL_TABLE_AUTO_ADJUST} is @code{1}, this value is treated as a default, initial size. If @code{SYMBOL_TABLE_AUTO_ADJUST} is @code{0}, this value controls the fixed size of the two symbol tables.  
   
 @item @code{SYMBOL_TABLE_AUTO_ADJUST} +R +U -D  @item @code{SYMBOL_TABLE_AUTO_ADJUST} +R +U -D
 Determines whether or not the size of the two FreeM symbol tables will be automatically adjusted at runtime. If set to @code{0}, the symbol table will be fixed to the byte size specified in @code{SYMBOL_TABLE_SIZE} and may be manually resized by modifying @code{SYMBOL_TABLE_SIZE}. If set to @code{1}, the two symbol tables will grow automatically as necessary.  Determines whether or not the size of the two FreeM symbol tables will be automatically adjusted at runtime. If set to @code{0}, the symbol table will be fixed to the byte size specified in @code{SYMBOL_TABLE_SIZE} and may be manually resized by modifying @code{SYMBOL_TABLE_SIZE}. If set to @code{1}, the two symbol tables will grow automatically as necessary.
   
   @item @code{SYMBOL_TABLE_SIZE} +R +U -D
   Returns or sets the number of bytes allocated to each of the two FreeM symbol tables. If @code{SYMBOL_TABLE_AUTO_ADJUST} is @code{1}, this value is treated as a default, initial size. If @code{SYMBOL_TABLE_AUTO_ADJUST} is @code{0}, this value controls the fixed size of the two symbol tables.
   
 @item @code{USER_DEFINED_ISV_TABLE_SIZE} +R +U -D  @item @code{USER} +R -U -D
 Returns or sets the number of bytes allocated to the FreeM user-defined intrinsic special variable table. If @code{USER_DEFINED_ISV_TABLE_AUTO_ADJUST} is @code{1}, this value is treated as a default, initial size. If @code{USER_DEFINED_ISV_TABLE_AUTO_ADJUST} is @code{0}, this value controls the fixed byte size of the user-defined intrinsic special variable table.  Returns the UID of the user owning the job.
   
 @item @code{USER_DEFINED_ISV_TABLE_AUTO_ADJUST} +R +U -D  @item @code{USER_DEFINED_ISV_TABLE_AUTO_ADJUST} +R +U -D
 Determines whether or not the size of the FreeM user-defined intrinsic special variable table will be automatically adjusted at runtime. If set to @code{0}, the user-defined ISV table will be fixed to the byte size specified in @code{USER_DEFINED_ISV_TABLE_SIZE} and may be manually resized by modifying @code{USER_DEFINED_ISV_TABLE_SIZE}. If set to @code{1}, the user-defined ISV table will grow automatically as necessary.  Determines whether or not the size of the FreeM user-defined intrinsic special variable table will be automatically adjusted at runtime. If set to @code{0}, the user-defined ISV table will be fixed to the byte size specified in @code{USER_DEFINED_ISV_TABLE_SIZE} and may be manually resized by modifying @code{USER_DEFINED_ISV_TABLE_SIZE}. If set to @code{1}, the user-defined ISV table will grow automatically as necessary.
   
 @item @code{GVN_UNIQUE_CHARS} +R +U -D  @item @code{USER_DEFINED_ISV_TABLE_SIZE} +R +U -D
 Returns or sets the number of characters of a global name that make it unique, from 1 to 255.  Returns or sets the number of bytes allocated to the FreeM user-defined intrinsic special variable table. If @code{USER_DEFINED_ISV_TABLE_AUTO_ADJUST} is @code{1}, this value is treated as a default, initial size. If @code{USER_DEFINED_ISV_TABLE_AUTO_ADJUST} is @code{0}, this value controls the fixed byte size of the user-defined intrinsic special variable table.
   
 @item @code{GVN_CASE_SENSITIVE} +R +U -D  
 Returns or sets the case sensitivity of global names. If set to @code{0}, global names are case-insensitive. If set to @code{1}, global names are case-sensitive.  
   
 @item @code{GVN_NAME_SUB_LENGTH} +R +U -D  
 Returns or sets the maximum number of characters of a global name plus all of its subscripts, from 1-255.  
   
 @item @code{GVN_SUB_LENGTH} +R +U -D  
 Returns or sets the maximum number of characters of a single global subscript, from 1-255.  
   
 @item @code{SINGLE_USER} +R +U -D  
 If set to @code{1}, FreeM will skip all file locking operations on globals. If set to @code{0}, FreeM will enforce file locking on both.  
   
 Setting @code{SINGLE_USER} to @code{1} will improve FreeM performance, but you must @emph{ONLY} use this on systems where you are absolutely sure that only one FreeM process will run at any given time, as running multiple instances of FreeM concurrently when any of them are set to @code{SINGLE_USER} mode @emph{will} cause global data corruption.  @item @code{USER_ERRORS} +R +U +D
   
 @item @code{CHARACTER} +R -U -D  Custom error messages for @code{ZUSERERR} may be set in @code{^$JOB($JOB,"USER_ERRORS",<user_error_code>)}, where @code{<user_error_code>} represents the custom error code.
 Returns the character set of the job.  
   
 @item @code{CWD} +R +U -D  
 Returns or sets the current working directory of the job.  
   
 @item @code{OPEN} +R -U -D  For example:
 The @code{^$JOB($JOB,"OPEN",<channel>} subscripts list the open I/O channels in the specified job.  
   
 @item @code{BERKELEYDB,FLUSH_THRESHOLD} +R +U -D  @example
 Returns or sets the number of write operations that will be cached in the BerkeleyDB global handler prior to flushing BerkeleyDB's cache to disk.  DEFAULT.USER> S ^$JOB($JOB,"USER_ERRORS","UBLACKHOLE")="black hole encountered"
   
 @item @code{EVENT} +R +U +D  
 The subtree contained under @code{^$JOB($J,"EVENT")} defines asynchronous event handlers for the current job. Please see @emph{Asynchronous Event Handling} for more information.  
   
 @item @code{GLOBAL} +R -U -D  DEFAULT.USER> ZTHROW UBLACKHOLE
 Returns the global environment of the job.  
   
 @item @code{IOPATH} +R +U -D  
 Returns or sets the @emph{I/O path} to be used by the @code{OPEN} command.  
   
 @item @code{PRIORITY} +R +U -D  >> Error UBLACKHOLE:  black hole encountered in SYSTEM::^%SYSINIT  [$STACK = 0]
 Returns or sets the @emph{nice} value of the FreeM job.  >> ZTHROW UBLACKHOLE
                     ^
   @end example
   
 @item @code{REVSTR} +R +U -D  Note that the error code must begin with @code{U}.
 When set to 1, allows @code{$EXTRACT} to accept negative values.  
   
 @item @code{ROUTINE} +R -U -D  @item @code{ZCOMMANDS} +R +U -D
 Returns the name of the routine currently being executed by the job.  Contains a space-delimited list of @code{Z}-commands to be treated as intrinsic. Any @code{Z}-command not appearing in this list will be treated as a user-defined command.
   
 @item @code{SYMTAB} +R +U -D  For instance, if command @code{ZFOO} does @emph{not} appear in this list, FreeM will attempt to run @code{^%ZFOO} as a subroutine when the @code{ZFOO} command is encountered in program code.
 Returns or sets the current local variable symbol table in use.  
   
 FreeM supports two unique and independent symbol tables, allowing FreeM programs to maintain two independent sets of identically- or differently-named local variables per process.  If you remove a command from this list, you may provide your own private M implementation of the command in the manner described above.
   
 The default symbol table is @code{0}, and the alternate symbol table is @code{1}, corresponding to the valid values for @code{^$JOB($JOB,"SYMTAB")}.  If an argument is passed to a @code{Z}-command you implement in M, it is made available to your M code in a variable whose name is specified in @code{^$JOB($JOB,"ZCOMMAND_ARGUMENT_NAME")}, which defaults to @code{%}.
   
 Setting this subscript to values other than @code{0} or @code{1} will result in a @code{ZINVEXPR} error.  @item @code{ZCOMMAND_ARGUMENT_NAME} +R +U -D
   Returns or sets the variable name in which arguments to user-defined @code{Z}-commands are passed. Defaults to @code{%}.
   
 @item @code{$PDISPLAY} +R -U -D  @item @code{ZFUNCTIONS} +R +U -D
 Returns the value of @code{$PDISPLAY} for the job.  Contains a space-delimited list of @code{Z} functions to be treated as intrinsic. Any @code{Z} function not appearing in this list will be treated as a user-defined extrinsic function.
   
 @item @code{$PRINCIPAL} +R -U -D  For instance, if function @code{$ZFOO} does @emph{not} appear in this list, FreeM will attempt to return the value of @code{$$^%ZFOO} called as an extrinsic function.
 Returns the value of @code{$PRINCIPAL} for the job.  
   
 @item @code{$TLEVEL} +R -U -D  If you remove a function from this list, you may provide your own private M implementation of the function in the manner described above.
 Returns the current transaction level (value of @code{$TLEVEL} for the job.  
   
 @item @code{$IO} +R -U -D  @item @code{ZSVS} +R +U -D
 Returns the current value of @code{$IO} for the job.  Contains a space-delimited list of @code{Z} special variables to be treated as intrinsic. Any @code{Z} special variable  not appearing in this list will be treated as a user-defined extrinsic function taking no arguments.
   
 @item @code{USER} +R -U -D  For instance, if the special variable @code{$ZFOO} does @emph{not} appear in this list, FreeM will attempt to return the value of @code{$$^%ZFOO} called as an extrinsic function.
 Returns the UID of the user owning the job.  
   
 @item @code{GROUP} +R -U -D  If you remove a built-in special variable from this list, you may provide your own private M implementation of the special variable in the manner described above.
 Returns the GID of the group owning the job.  
   
 @item @code{NAMESPACE} +R +U -D  
 Returns or sets the name of the job's currently-active namespace.  
   
 @item @code{MATH} +R +U -D  
 Returns or sets the mode in which decimal comparisons and arithmetic calculations are conducted. Valid values are @code{FIXED}, for fixed-point decimals having up to 20,000 digits of precision, as determined by the @code{$ZPRECISION} intrinsic special variable, and @code{IEEE754}, to use IEEE 754 floating-point decimals. When in @code{IEEE754} mode, floating-point numbers support up to 16 digits of numeric precision.  
   
 @code{IEEE754} mode will make mathematical calculations significantly faster, especially when accelerated by a floating-point processor, at the expense of precision and accuracy.  
   
 @code{FIXED} mode is recommended for financial calculations, or where precision and accuracy are valued over performance. @code{FIXED} is the default mode of FreeM operation.  
   
 Attempting to @code{SET} this node to values other than @code{FIXED} or @code{IEEE754} will set @code{$ECODE} to @code{M29}.  
   
 @end table  @end table
   
Line 5820  Raised when attempts are made to set @co Line 5871  Raised when attempts are made to set @co
 Raised when an @code{ZASSERT} expression's result is not true.  Raised when an @code{ZASSERT} expression's result is not true.
   
 @item @code{ZUSERERR} - @emph{user-defined error}  @item @code{ZUSERERR} - @emph{user-defined error}
 Raised when program code calls @code{THROW} with an error code argument for which the first character is @code{U}, or when @code{$ECODE} is set to an error code for which the first character is @code{U}.  Raised when program code calls @code{ZTHROW} with an error code argument for which the first character is @code{U}, or when @code{$ECODE} is set to an error code for which the first character is @code{U}.
   
 Custom error messages for @code{ZUSERERR} may be set in @code{^$JOB($JOB,"USER_ERRORS",<user_error_code>)}, where @code{<user_error_code>} represents the custom error code.  Custom error messages for @code{ZUSERERR} may be set in @code{^$JOB($JOB,"USER_ERRORS",<user_error_code>)}, where @code{<user_error_code>} represents the custom error code.
   
Line 5830  For example: Line 5881  For example:
 DEFAULT.USER> S ^$JOB($JOB,"USER_ERRORS","UBLACKHOLE")="black hole encountered"  DEFAULT.USER> S ^$JOB($JOB,"USER_ERRORS","UBLACKHOLE")="black hole encountered"
   
   
 DEFAULT.USER> THROW UBLACKHOLE  DEFAULT.USER> ZTHROW UBLACKHOLE
   
   
 >> Error UBLACKHOLE:  black hole encountered in SYSTEM::^%SYSINIT  [$STACK = 0]  >> Error UBLACKHOLE:  black hole encountered in SYSTEM::^%SYSINIT  [$STACK = 0]
 >> THROW UBLACKHOLE  >> ZTHROW UBLACKHOLE
                   ^                    ^
 @end example  @end example
   
Removed from v.1.59  
changed lines
  Added in v.1.64

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>